Fireplace Repair Repair My Fireplace Gas Lighter. It Was A Bit Temperamental To Begin With Now It Does Not Light Up Atall?
Repair my fireplace gas lighter. It was a bit temperamental to begin with now it does not light up atall? - fireplace repair
I have tried to use a game to sitck light. It seems that to go to the gas, blocked the exit. My friend tries, check it with a candle, and managed to pour the wax everywhere. I cleaned, but not always?
|
7 comments:
Her boyfriend is a loser can explode the gas in your house, get a Corgi person who knows your brand of fire
I think you try to make the light on the control of gas logs or fireplace. Mine are occasionally cleaned. I use an old toothbrush to the tip of the thermocouple of waste collected at the end of herself clean. If the pilot is dirty does not turn on, records are not enabled or not. When you have led the wax to the pilots of May, completely removed for cleaning. Good luck.
I think you try to make the light on the control of gas logs or fireplace. Mine are occasionally cleaned. I use an old toothbrush to the tip of the thermocouple of waste collected at the end of herself clean. If the pilot is dirty does not turn on, records are not enabled or not. When you have led the wax to the pilots of May, completely removed for cleaning. Good luck.
You need to call someone to do it for you. Stick candles, while the gas there is probably not a good idea. Also remember, if you blow with compressed air, using non-combustible nature or lose a few eyebrows.
I do not know what kind of device you have. Is this a gas fireplace? Or is it), a slight fireplace (for the treatment of a traditional fireplace light?
I do not know what kind of device you have. Is this a gas fireplace? Or is it), a slight fireplace (for the treatment of a traditional fireplace light?
There must be a line valve installed somewhere under or behind the register. Make sure. With the knob on the pilot's seat and take a pint of BBQ or matches long and up to the end of the pilot project between him and the thermocouple. If you see fire blowing flows with the force of the air. If so, please feel free to bleed the air. If you keep the game from there, and I see no difference in the flame blown into the air, the pilot is clogged
Use canned air and fly back through the pilot, trying to remove the obstacle. Try again and lite. If this is not successful, call a
Post a Comment